Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)
Alle afleveringen
91 afleveringen, van nieuw naar oud
-
Implement VLANs and Trunking - VLANs - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 40
24 augustus 2022 · 43 min
In this episode we are going to look at configuring Implement VLANs and Trunking. Lees meer
We are working in a company that is getting ready to deploy a set of new switches in a branch office. We are working in the lab to test out the VLAN and trunking configurations that are planned. Configure and test the VLANs and trunks.
We will be Configuring VLANs, Assigning Ports to VLANs, Configuring Static Trunking, and Configure Dynamic Trunking.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
VLANs
Lab 3.6.1 - Implement VLANs and Trunking
Podcast Number: 40
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure DTP - VLANs - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 39
22 augustus 2022 · 51 min
In this episode we are going to look at configuring Implement VLANs and Trunking. Lees meer
We are working in a company that is getting ready to deploy a set of new switches in a branch office. We are working in the lab to test out the VLAN and trunking configurations that are planned. Configure and test the VLANs and trunks.
We will be Configuring VLANs, Assigning Ports to VLANs, Configuring Static Trunking, and Configure Dynamic Trunking.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
VLANs
Lab 3.5.5 - Configure DTP
Podcast Number: 39
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Trunks - VLANs - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 38
19 augustus 2022 · 25 min
In this episode we are going to look at configuring Configure Trunks. Lees meer
Trunks are required to pass VLAN information between switches. A port on a switch is either an access port or a trunk port. Access ports carry traffic from a specific VLAN assigned to the port. A trunk port by default is a member of all VLANs. Therefore, it carries traffic for all VLANs. This activity focuses on creating trunk ports and assigning them to a native VLAN other than the default.
We will be discussing Verifying VLANs and Configure Trunks.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
VLANs
Lab 3.4.5 - Configure Trunks
Podcast Number: 38
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
VLAN Configuration - VLANs - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 37
17 augustus 2022 · 39 min
In this episode we are going to look at configuring VLAN Configuration. Lees meer
VLANs are helpful in the administration of logical groups, allowing members of a group to be easily moved, changed, or added. This activity focuses on creating and naming VLANs, and assigning access ports to specific VLANs.
We will be discussing Verify the Default VLAN Configuration, Configure VLANs, and Assign VLANs to Ports.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
VLANs
Lab 3.3.12 - VLAN Configuration
Podcast Number: 37
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Investigate a VLAN Implementation - VLANs - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 36
15 augustus 2022 · 39 min
In this episode we are going to look at configuring Investigate a VLAN Implementation. Lees meer
In this activity, we will observe how broadcast traffic is forwarded by the switches when VLANs are configured and when VLANs are not configured.
We will be Observing Broadcast Traffic in a VLAN Implementation and without VLANs.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
VLANs
Lab 3.2.8 - Investigate a VLAN Implementation
Podcast Number: 36
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Who Hears the Broadcast? - VLANs - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 35
12 augustus 2022 · 29 min
In this episode we are going to look at configuring Who Hears the Broadcast?. Lees meer
In this activity, a 24-port Catalyst switch is fully populated. All ports are in use. We will observe broadcast traffic in a VLAN implementation and answer some reflection questions.
We will be Observing Broadcast Traffic in a VLAN Implementation and Complete Review Questions.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
VLANs
Lab 3.1.4 - Who Hears the Broadcast?
Podcast Number: 35
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Implement a Small Network - Basic Device Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 34
8 augustus 2022 · 48 min
In this episode we are going to look at configuring Implement a Small Network. Lees meer
We will be discussing Creating the Network Topology and finally Configuring Devices and Verify Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Basic Device Configuration
Lab 1.6.1 - Implement a Small Network
Podcast Number: 34
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Verify Directly Connected Networks - Basic Device Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 33
8 augustus 2022 · 31 min
In this episode we are going to look at configuring Verify Directly Connected Networks. Lees meer
Routers each have two LANs. Your task is to verify the addressing on each device and verify connectivity between the LANs.
We will be discussing Verify IPv4 and IPv6 Directly Connected Networks and Troubleshoot connectivity issues.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Basic Device Configuration
Lab 1.5.10 - Verify Directly Connected Networks
Podcast Number: 33
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Router Interfaces - Basic Device Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 32
5 augustus 2022 · 19 min
In this episode we are going to look at configuring Configure Router Interfaces. Lees meer
Routers each have two LANs. Your task is to configure the appropriate addressing on each device and verify connectivity between the LANs.
We will be discussing Configure IPv4 and IPv6 Addressing and Verify Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Basic Device Configuration
Lab 1.4.7 - Configure Router Interfaces
Podcast Number: 32
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure SSH - Basic Device Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 31
3 augustus 2022 · 18 min
In this episode we are going to look at configuring Configure SSH. Lees meer
SSH should replace Telnet for management connections. Telnet uses insecure plain text communications. SSH provides security for remote connections by providing strong encryption of all transmitted data between devices. In this activity, we will secure a remote switch with password encryption and SSH.
We will be discussing Secure Passwords, Encrypt Communications, and Verify SSH Implementation.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Basic Device Configuration
Lab 1.3.6 - Configure SSH
Pod Number: 31
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshooting Challenge - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 30
1 augustus 2022 · 46 min
In this episode we are going to look at configuring Troubleshooting Challenge. Lees meer
After an update to the network, some devices were misconfigured. We must correct the configurations and verify that all the PCs can access the Web server, router, and the switches. In addition, all PCs should be able to access R1 using SSH. We should verify connectivity for both IPv4 and IPv6 except for the switches.
We will be discussing Troubleshoot common issues in a LAN.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Build a Small Network
Lab 17.8.3 - Troubleshooting Challenge
Pod Number: 30
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Skills Integration Challenge - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 29
29 juli 2022 · 1 uur 18 min
In this episode we are going to look at configuring Skills Integration Challenge. Lees meer
The router Central, ISP cluster, and the Web server are completely configured. We must create a new IPv4 addressing scheme that will accommodate 4 subnets using the 192.168.0.0/24 network. The IT department requires 25 hosts. The Sales department needs 50 hosts. The subnet for the rest of the staff requires 100 hosts. A Guest subnet will be added in the future to accommodate 25 hosts. We must also finish the basic security settings and interface configurations on the router. Then, we will configure the SVI interface and basic security settings on the switches.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Build a Small Network
Lab 17.8.2 - Skills Integration Challenge
Pod Number: 29
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshoot Connectivity Issues - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 28
27 juli 2022 · 47 min
In this episode we are going to look at configuring Troubleshoot Connectivity Issues. Lees meer
Users are reporting that they cannot access the web server after a recent upgrade that included adding a second DNS server. We must determine the cause and attempt to resolve the issues for the users. Clearly document the issues and any solution(s). We do not have access to the devices in the cloud or the web server. Escalate the problem if necessary.
We will be discussing troubleshoot and resolve connectivity issues, if possible. Otherwise, the issues should be clearly documented so they can be escalated.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Build a Small Network
Lab 17.7.7 - Troubleshoot Connectivity Issues
Pod Number: 28
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Interpret show Command Output - Build a Small Network - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 27
25 juli 2022 · 30 min
In this episode we are going to look at configuring Interpret show Command Output. Lees meer
This activity is designed to reinforce the use of router show commands. We are not required to configure, but rather to examine the output of several show commands.
We will be discussing Analyze Show Command Output and finally Reflection Questions.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Build a Small Network
Lab 17.5.9 - Interpret show Command Output
Pod Number: 27
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Secure Network Devices - Network Security Fundamentals - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 26
22 juli 2022 · 38 min
In this episode we are going to look at configuring Secure Network Devices. Lees meer
In this activity we will configure a router and a switch based on a list of requirements.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Network Security Fundamentals
Lab 16.5.1 - Secure Network Devices
Pod Number: 26
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Secure Passwords and SSH - Network Security Fundamentals - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 25
20 juli 2022 · 40 min
In this episode we are going to look at configuring Configure Secure Passwords and SSH. Lees meer
The network administrator has asked us to prepare RTA and SW1 for deployment. Before they can be connected to the network, security measures must be enabled.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YoTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Network Security Fundamentals
Lab 16.4.6 - Configure Secure Passwords and SSH
Pod Number: 25
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
TCP and UDP Communications - Transport Layer - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 24
18 juli 2022 · 1 uur 6 min
In this episode we are going to look at configuring TCP and UDP Communications. Lees meer
This simulation activity is intended to provide a foundation for understanding TCP and UDP in detail. Simulation mode provides us the ability to view the state of different PDUs as they travel through the network. Simulation mode enables us to view each of the protocols and the associated PDUs. The steps following lead us through the process of requesting network services using various applications that are available on a client PC. We will explore the functionality of the TCP and UDP protocols, multiplexing, and the function of port numbers in determining which local application requested the data or is sending the data.
We will be discussing Generate Network Traffic in Simulation Mode and finally Examine the Functionality of the TCP and UDP Protocols.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Transport Layer
Lab 14.8.1 - TCP and UDP Communications
Pod Number: 24
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Use ICMP to Test and Correct Network Connectivity - ICMP - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 23
15 juli 2022 · 29 min
In this episode we are going to look at configuring Use ICMP to Test and Correct Network Connectivity. Lees meer
Customers have been complaining that they can’t reach some network resources. We have been asked to test connectivity in the network. We will use ICMP to find out which resources are unreachable and the locations from which they can’t be reached. Then, we will use trace to locate the point at which network connectivity is broken. Finally, we will fix the errors that you find to restore connectivity to the network.
We will be discussing In this lab we will use ICMP to test network connectivity and locate network problems, We will also correct simple configuration issues and restore connectivity to the network, Use ICMP to locate connectivity issues, and finally Configure network devices to correct connectivity issues.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
ICMP
Lab 13.3.1 - Use ICMP to Test and Correct Network Connectivity
Pod Number: 23
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Use Ping and Traceroute to Test Network Connectivity - ICMP - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 22
13 juli 2022 · 39 min
In this episode we are going to look at configuring Use Ping and Traceroute to Test Network Connectivity. Lees meer
There are connectivity issues in this activity. In addition to gathering and documenting information about the network, we will locate the problems and implement acceptable solutions to restore connectivity.
We will be discussing Test and Restore IPv4 Connectivity and finally Test and Restore IPv6 Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
ICMP
Lab 13.2.7 - Use Ping and Traceroute to Test Network Connectivity
Pod Number: 22
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Verify IPv4 and IPv6 Addressing - ICMP - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 21
11 juli 2022 · 33 min
In this episode we are going to look at configuring Verify IPv4 and IPv6 Addressing. Lees meer
Dual-stack allows IPv4 and IPv6 to coexist on the same network. We will investigate a dual-stack implementation including documenting the IPv4 and IPv6 configuration for end devices, testing connectivity for both IPv4 and IPv6 using ping, and tracing the path from end to end for IPv4 and IPv6.
We will be discussing Complete the Addressing Table Documentation, Test Connectivity Using Ping, and Discover the Path by Tracing the Route.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
ICMP
Lab 13.2.6 - Verify IPv4 and IPv6 Addressing
Pod Number: 21
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Implement a Subnetted IPv6 Addressing Scheme - IPv6 Addressing - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 20
8 juli 2022 · 41 min
In this episode we are going to look at configuring Implement a Subnetted IPv6 Addressing Scheme. Lees meer
Network administrators must know how to implement IPv6 in their networks. We have been asked to set up a network for use by the sales staff for a customer demonstration. The network will use a series of consecutive IPv6 subnets for four LANs. Our job is to assign the subnets to the LANs and configure the routers and PCs with IPv6 addressing. We need to make certain to configure all the necessary components for IPv6 routing on the routers.
We will be discussing Determine IPv6 subnets and addressing scheme, Configure IPv6 addressing on routers and PCs, and finally Verify IPv6 connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv6 Addressing
Lab 12.9.1 - Implement a Subnetted IPv6 Addressing Scheme
Pod Number: 20
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure IPv6 Addressing - IPv6 Addressing - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 19
6 juli 2022 · 43 min
In this episode we are going to look at configuring Configure IPv6 Addressing. Lees meer
We will practice configuring IPv6 addresses on a router, servers, and clients. We will also practice verifying your IPv6 addressing implementation.
We will be discussing Configure IPv6 Addressing on the Router, Configure IPv6 Addressing on Servers, Configure IPv6 Addressing on Clients, and finally Test and Verify Network Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv6 Addressing
Lab 12.6.6 - Configure IPv6 Addressing
Pod Number: 19
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
VLSM Design and Implementation Practice - IPv4 Addressing - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 18
4 juli 2022 · 1 uur 26 min
In this episode we are going to look at configuring VLSM Design and Implementation Practice. Lees meer
We are given a /24 network address to use to design a VLSM addressing scheme. Based on a set of requirements, we will assign subnets and addressing, configure devices and verify connectivity.
We will be discussing Examine the Network Requirements, Design the VLSM Addressing Scheme, and finally Assign IP Addresses to Devices and Verify Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv4 Addressing
Lab 11.9.3 - VLSM Design and Implementation Practice
Pod Number: 18
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Subnetting Scenario - IPv4 Addressing - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 17
1 juli 2022 · 1 uur 8 min
In this episode we are going to look at configuring Subnetting Scenario. Lees meer
We are given the network address of 192.168.100.0/24 to subnet and provide the IP addressing for the Packet Tracer network. Each LAN in the network requires at least 25 addresses for end devices, the switch and the router. The connection between R1 to R2 will require an IP address for each end of the link.
We will be discussing Design an IP Addressing Scheme and Assign IP Addresses to Network Devices and Verify Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv4 Addressing
Lab 11.7.5 - Subnetting Scenario
Pod Number: 17
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Subnet an IPv4 Network - IPv4 Addressing - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 16
29 juni 2022 · 1 uur 9 min
In this episode we are going to look at configuring Subnet an IPv4 Network. Lees meer
We will subnet the Customer network into multiple subnets. The subnet scheme should be based on the number of host computers required in each subnet, as well as other network considerations, like future network host expansion. After we have created a subnetting scheme and completed the table by filling in the missing host and interface IP addresses, we will configure the host PCs, switches and router interfaces After the network devices and host PCs have been configured, we will use the ping command to test for network connectivity.
We will be discussing Design an IPv4 Network Subnetting Scheme, Configure the Devices, and finally Test and Troubleshoot the Network.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
IPv4 Addressing
Lab 11.5.5 - Subnet an IPv4 Network
Pod Number: 16
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Basic Device Configuration - Basic Router Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 15
27 juni 2022 · 58 min
In this episode we are going to look at configuring Basic Device Configuration. Lees meer
Our network manager is impressed with our performance in our job as a LAN technician. She would like us to demonstrate your ability to configure a router that connects two LANs. Our tasks include configuring basic settings on a router and a switch using the Cisco IOS. We will also configure IPv6 addresses on network devices and hosts. We will then verify the configurations by testing end-to-end connectivity. Our goal is to establish connectivity between all devices.
We will be discussing Complete the network documentation, Perform basic device configurations on a router and a switch, an finally Verify connectivity and troubleshoot any issues.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.4.3 - Basic Device Configuration
Pod Number: 15
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshoot Default Gateway Issues - Basic Router Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 14
24 juni 2022 · 46 min
In this episode we are going to look at configuring Troubleshoot Default Gateway Issues. Lees meer
For a device to communicate across multiple networks, it must be configured with an IP address, subnet mask, and a default gateway. The default gateway is used when the host wants to send a packet to a device on another network. The default gateway address is generally the address of the router interface which is attached to the local network that the host is connected to. In this activity, you will finish documenting the network. You will then verify the network documentation by testing end-to-end connectivity and troubleshooting issues.
The troubleshooting method we will use consists of the following steps:
► Verify the network documentation and use tests to isolate problems.
► Determine an appropriate solution for a given problem.
► Implement the solution.
► Test to verify the problem is resolved.
► Document the solution.
Throughout your CCNA studies, you will encounter different descriptions of the troubleshooting method, as well as different ways to test and document issues and solutions. This is intentional. There is no set standard or template for troubleshooting.
We will be discussing Verify Network Documentation and Isolate Problems, and finally Implement, Verify, and Document Solutions.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.3.5 - Troubleshoot Default Gateway Issues
Pod Number: 14
Season: 1
-------------------------------------------------------
Equipm…
-
Connect a Router to a LAN - Basic Router Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 13
22 juni 2022 · 39 min
In this episode we are going to look at configuring Connect a Router to a LAN. Lees meer
In this activity, we will use various show commands to display the current state of the router. We will then use the Addressing Table to configure router Ethernet interfaces. Finally, we will use commands to verify and test your configurations.
We will be discussing Display Router Information, Configure Router Interfaces, and Verify the Configuration.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.3.4 - Connect a Router to a LAN
Pod Number: 13
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Initial Router Settings - Basic Router Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 12
20 juni 2022 · 31 min
In this episode we are going to look at configuring Configure Initial Router Settings. Lees meer
We will perform basic router configuration tasks. We will secure access to the CLI and console port using encrypted and plain-text passwords. We will also configure messages for users who are logging into the router. These banners warn unauthorized users that access is prohibited. Finally, we will verify and save your running configuration.
We will be discussing Verify the Default Router Configuration, Configure and Verify the Initial Router Configuration, and Save the Running Configuration File.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Router Configuration
Lab 10.1.4 - Configure Initial Router Settings
Pod Number: 12
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
IPv6 Neighbor Discovery - Address Resolution - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 11
17 juni 2022 · 48 min
In this episode we are going to look at Configuring IPv6 Neighbor Discovery. Lees meer
In order for a device to communicate with another device, the MAC address of the destination must be known. With IPv6, a process called Neighbor Discovery using NDP or ND protocol is responsible for determining the destination MAC address. We will gather PDU information in simulation mode to better understand the process.
We will be discussing IPv6 Neighbor Discovery Local Network and IPv6 Neighbor Discovery Remote Network.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Address Resolution
Lab 9.3.4 - IPv6 Neighbor Discovery
Pod Number: 11
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Examine the ARP Table - Address Resolution - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 10
15 juni 2022 · 30 min
In this episode we are going to look at Examine the ARP Table. Lees meer
This activity is optimized for viewing PDUs. The devices are already configured. We will gather PDU information in simulation mode and answer a series of questions about the data you collect.
We will be discussing Examine an ARP Request, Examine a Switch MAC Address Table, and Examine the ARP Process in Remote Communications.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Address Resolution
Lab 9.2.9 - Examine the ARP Table
Pod Number: 10
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Identify MAC and IP Addresses - Address Resolution - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 9
13 juni 2022 · 1 uur 16 min
In this episode we are going to look at Configuring and Identifying MAC and IP Addresses. Lees meer
This activity is optimized for viewing PDUs. The devices are already configured. We will gather PDU information in simulation mode and answer a series of questions about the data you collect.
We will be discussing Gather PDU Information for Local Network Communication and Gather PDU Information for Remote Network Communication.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Address Resolution
Lab 9.1.3 - Identify MAC and IP Addresses
Lab Number: 9
Pod Number: 9
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Connect the Physical Layer - Physical Layer - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 8
10 juni 2022 · 40 min
In this episode we are going to look at Configuring and Connecting the Physical Layer. Lees meer
We will explore the different options available on internetworking devices. We will also be required to determine which options provide the necessary connectivity when connecting multiple devices. Finally, we will add the correct modules and connect the devices.
We will be discussing Identify Physical Characteristics of Internetworking Devices, Select Correct Modules for Connectivity, Connect Devices, and Check Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Physical Layer
Lab 4.7.1 - Connect the Physical Layer
Lab Number: 8
Pod Number: 8
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Connect a Wired and Wireless LAN - Physical Layer - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 7
8 juni 2022 · 35 min
In this episode we are going to look at Configuring and Connecting a Wired and Wireless LAN. Lees meer
When working in a lab environment or a corporate setting, you should know how to select the appropriate cable and how to properly connect devices. We will examine device configurations, selecting the proper cable based on the configuration, and connecting the devices. We will also explore the physical view of the network in Packet Tracer.
We will be discussing Connect to the Cloud, Connect Router0, Connect Remaining Devices, Verify Connections, Examine the Physical Topology.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Physical Layer
Lab 4.6.5 - Connect a Wired and Wireless LAN
Lab Number: 7
Pod Number: 7
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Investigate the TCP/IP and OSI Models in Action - Protocols and Models - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 6
6 juni 2022 · 27 min
In this episode we are going to look at Investigate the TCP/IP and OSI Models in Action. Lees meer
This activity is intended to provide a foundation for understanding the TCP/IP protocol suite and the relationship to the OSI model. Allows you to view the data contents being sent across the network at each layer. As data moves through the network, it is broken down into smaller pieces and identified so that the pieces can be put back together when they arrive at the destination. Each piece is assigned a specific name (protocol data unit [PDU]) and associated with a specific layer of the TCP/IP and OSI models. Simulation mode enables you to view each of the layers and the associated PDU. The following steps lead the user through the process of requesting a web page from a web server by using the web browser application available on a client PC Even though much of the information displayed will be discussed in more detail later, this is an opportunity to explore the functionality and be able to visualize the encapsulation process.
We will be discussing Examine HTTP Web Traffic, Display Elements of the TCP/IP Protocol Suite.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Protocols and Models
Lab 3.5.5 - Investigate the TCP/IP and OSI Models in Action
Lab Number: 6
Pod Number: 6
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevT…
-
Basic Switch and End Device Configuration - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 5
3 juni 2022 · 27 min
In this episode we are going to look at Configuring Basic Switch and End Device Configuration. Lees meer
As a recently hired LAN technician, our network manager has asked us to demonstrate our ability to configure a small LAN. Our tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. We are to use two switches and two hosts/PCs on a cabled and powered network.
We will be discussing Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI), use Cisco IOS commands to specify or limit access to the device configurations, use IOS commands to save the running configuration, configure two host devices with IP addresses, and finally verify connectivity between the two PC end devices.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Switch and End Device Configuration
Lab 2.9.1 - Basic Switch and End Device Configuration
Lab Number: 5
Pod Number: 5
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Implement Basic Connectivity - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 4
1 juni 2022 · 31 min
In this episode we are going to look at Configuring and Implementing Basic Connectivity. Lees meer
We will first create a basic switch configuration. Then, we will implement basic connectivity by configuring IP addressing on switches and PCs. When the IP addressing configuration is complete, we will use various show commands to verify the configuration and use the ping command to verify basic connectivity between devices.
We will be discussing performing a Basic Configuration on switches, Configuring the PCs, and Configuring the Switch Management Interface.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Switch and End Device Configuration
Lab 2.7.6 - Implement Basic Connectivity
Lab Number: 4
Pod Number: 4
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Initial Switch Settings - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | podcast 3
30 mei 2022 · 37 min
In this episode we are going to look at Configuring Initial Switch Settings. Lees meer
We will perform basic switch configuration tasks. We will secure access to the command-line interface (CLI) and console ports using encrypted and plain text passwords. We will also learn how to configure messages for users logging into the switch. These message banners are also used to warn unauthorized users that access is prohibited.
We will be discussing verifying the Default Switch Configuration, Configuring a Basic Switch Configuration, Configuring a MOTD Banner, and Saving Configuration Files to NVRAM.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Switch and End Device Configuration
Lab 2.5.5 - Configure Initial Switch Settings
Lab Number: 3
Pod Number: 3
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Navigate the IOS - Basic Switch and End Device Configuration - Configuration Examples for Introduction to Networks - CCNA - KevTechify | pod 2
27 mei 2022 · 24 min
In this episode we are going to look at Navigating the IOS. Lees meer
We'll look at the skills necessary for navigating the Cisco IOS, such as different user access modes, various configuration modes, and common commands used on a regular basis. We will also practice accessing the context-sensitive Help by configuring the clock command.
We will be looking at Establishing Basic Connections, Accessing the CLI, and finally Explore Help, Explore EXEC Modes, Set the Clock.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Basic Switch and End Device Configuration
Lab 2.3.7 - Navigate the IOS
Lab Number: 2
Pod Number: 2
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Network Representation - Networking Today - Configuration Examples for Introduction to Networks - CCNA - KevTechify | pod 1
25 mei 2022 · 26 min
In this episode we are going to look at Network Representation. Lees meer
We will be discussing the network model that incorporates many of the technologies that you will master in your CCNA studies. It represents a simplified version of how a small to medium-sized business network might look. Feel free to explore the network on your own.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Introduction to Networks v1 (ITN)
Networking Today
Lab 1.5.7 - Network Representation
Lab Number: 1
Pod Number: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Introduction - Intro - Configuration Examples for Introduction to Networks - CCNA - KevTechify | pod 0
23 mei 2022 · 3 min
CCNA v7: Practical Configuration Examples Lees meer
The fourth series on the CCNA.
Hi Everyone and welcome to my Tech Heads in the KevTechify Nation.
Thanks to new technologies, networks are becoming more intelligent, programmable and software-driven. This series support this evolution and will expose you to new concepts and experiences. Best of all, this series is tied to CCNA certifications.
In this series, Practical Configuration Examples, I’ll demonstrate and explain many of the concepts of the CCNA. I’ll use actual configuration to demonstrate these. I’ll work through practical examples of how to use these technologies and concepts. I’ll enter the commands and explain what and why I am doing the thing I am doing. We’ll start with basic device configuration, then look at addressing, VLANs, Router-on-a-Stick, basic security, Wireless configuration, routing protocols like OSPF, Access Control Lists, Network Address Translation, network management, and finally network troubleshooting.
Begin preparing for a networking career with this series on Practical Configuration Examples. This is my fourth series on the CCNA. It will introduce and demonstrate how to apply and use the concepts of the CCNA. Recommended preparation for this series is my other series on the CCNA.
I’m Kevin. I am a seasoned and experienced IT professional with over 20 years of experience in network administration, IT consulting, and adult technical education. I have a primary focus on being a Solutions Architect. I enjoy the challenge of finding innovative and practical solutions for IT projects. I have been involved with extensive practical implementations in a variety of technical and operational capacities including research and development, business strategies, project management, and process analysis for clients requiring a wide variety of technology-based solutions.
I also enjoy being a Technology Mentor. With a focus on certified technical training, I can be found either in a classroom environ…