Configuration Examples with KevTechify for the Cisco Certified Network Associate (CCNA)
Alle afleveringen
91 afleveringen, van nieuw naar oud
-
Troubleshooting Challenge - Use Documentation to Solve Issues - Network Troubleshooting - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 90
19 december 2022 · 52 min
In this episode we are going to look at Troubleshooting Challenge - Use Documentation to Solve Issues. Lees meer
In this activity, we will use the documentation that we created in the previous Packet Tracer - Troubleshooting Challenge - Document the Network activity to guide network troubleshooting efforts.
It has been discovered that the network that we worked with in the previous PT activity has developed communication problems. Some hosts are unable to ping other hosts and the internet server. It is our job to determine what the issues are and to locate and repair them.
Network issues could exist in any device. Be sure to check for comprehensive errors: Addressing configuration, Interface activation, Routing, and NAT
We will be using various techniques and tools to identify connectivity issues, Use documentation to guide troubleshooting efforts, Identify specific network problems, Implement solutions to network communication problems, and Verify network operation.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Troubleshooting
Lab 12.6.2 - Troubleshooting Challenge - Use Documentation to Solve Issues
Podcast Number: 90
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshooting Challenge - Document the Network - Network Troubleshooting - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 89
16 december 2022 · 1 uur 55 min
In this episode we are going to look at Troubleshooting Challenge - Document the Network. Lees meer
Our employer has been hired to take over the administration of a corporate network because the previous network administrator has left the company. The network documentation is missing and needs to be recreated. Our job is to document the hosts and network devices including all the device addressing and logical interconnections. We will remotely access network devices and use network discovery to complete a device table and draw the network topology.
This is Part I of a two-part series of activities. We will use the documentation that you create in this activity to guide you as you troubleshoot the network in Part II, Packet Tracer - Troubleshooting Challenge - Using Documentation to Solve Issues.
As we investigate and document the network topology, making note of issues that we discover that do not adhere to the practices taught in the CCNA curriculum.
We will be documenting a network that is unknown to you, Testing network connectivity, Compiling host addressing information, Remotely accessing default gateway devices, Documenting default gateway device configurations, Discovering devices on the network, and finally Drawing the network topology.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Troubleshooting
Lab 12.6.1 - Troubleshooting Challenge - Document the Network
Podcast Number: 89
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.…
-
Troubleshoot Enterprise Network - Network Design - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 88
14 december 2022 · 1 uur 15 min
In this episode we are going to look at Troubleshoot Enterprise Network. Lees meer
This activity uses a variety of technologies that you have encountered during your CCNA studies, including IPv4 routing, IPv6 routing, port security, EtherChannel, DHCP, and NAT. Our task is to review the requirements, isolate and resolve any problems, and then document the steps we took to verify the requirements.
The company replaced routers R1 and R3 to accommodate a fiber connection between the locations. Configurations from the previous routers with serial connections were modified and applied as a starting configuration. IPv6 is being tested on a small portion of the network and needs to be verified.
Note: Passwords have been removed for ease of troubleshooting in this exercise. The typical password protections should be reapplied; however, the activity will not grade those items.
We will be Verifying Switching Technologies, Verifying DHCP, Verifying Routing, and Verifying Connectivity.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Design
Lab 12.5.13 - Troubleshoot Enterprise Network
Podcast Number: 88
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Compare Layer 2 and Layer 3 Devices - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 87
12 december 2022 · 54 min
In this episode we are going to look at Compare Layer 2 and Layer 3 Devices. Lees meer
In this activity, we will use various commands to examine three different switching topologies and compare the similarities and differences between the 2960 and 3650 switches. We will also compare the routing table of a 4321 router with that of a 3650 switch.
We will be Comparing Layer 2 and Layer 3 Switches and finally Comparing a Layer 3 Switch and a Router.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Management
Lab 11.5.1 - Compare Layer 2 and Layer 3 Devices
Podcast Number: 87
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure CDP, LLDP, and NTP - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 86
9 december 2022 · 33 min
In this episode we are going to look at Configure CDP, LLDP, and NTP. Lees meer
A network administrator has been asked to investigate a new client’s network. Documentation is incomplete for the network, so some information needs to be discovered. In addition, the NTP server needs to be configured on a router. Discovery protocols must also be adjusted to control traffic discovery protocol traffic and prevent information about the network from being received by potentially unauthorized hosts.
Some of the device IP addresses are unknown to us. We must determine what the IP addresses are so that we can connect to the devices over SSH in order to configure them. We can enter them into the Addressing Table as you discover them.
We will be configuring a router to receive time information over NTP and configure devices with CDP and LLDP, Configuring CDP to run globally on a device, Disabling CDP on device interfaces where necessary, Configuring LLDP to run globally on a device, Configuring LLDP to send and receive messages according to requirements, and finally Configuring a router to use an NTP server.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Management
Lab 10.8.1 - Configure CDP, LLDP, and NTP
Podcast Number: 86
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Use a TFTP Server to Upgrade a Cisco IOS Image - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 85
7 december 2022 · 22 min
In this episode we are going to look at Use a TFTP Server to Upgrade a Cisco IOS Image. Lees meer
A TFTP server can help manage the storage of IOS images and revisions to IOS images. For any network, it is good practice to keep a backup copy of the Cisco IOS Software image in case the system image in the router becomes corrupted or accidentally erased. A TFTP server can also be used to store new upgrades to the IOS and then deployed throughout the network where it is needed. In this activity, we will upgrade the IOS images on Cisco devices by using a TFTP server. We will also backup an IOS image with the use of a TFTP server.
We will be Upgrading an IOS Image on a Cisco Device and Backing up an IOS Image on a TFTP Server.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Management
Lab 10.7.6 - Use a TFTP Server to Upgrade a Cisco IOS Image
Podcast Number: 85
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Back Up Configuration Files - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 84
5 december 2022 · 23 min
In this episode we are going to look at Back Up Configuration Files. Lees meer
In this activity we will restore a configuration from a backup and then perform a new backup. Due to an equipment failure, a new router has been put in place. Fortunately, backup configuration files have been saved to a Trivial File Transfer Protocol (TFTP) Server. We are required to restore the files from the TFTP Server to get the router back online as quickly as possible.
We will be Establishing Connectivity to TFTP Server, Transferring the Configuration File from TFTP Server, and finally Backup Configuration and IOS to TFTP Server.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Management
Lab 10.6.10 - Back Up Configuration Files
Podcast Number: 84
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure and Verify NTP - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 83
2 december 2022 · 15 min
In this episode we are going to look at Configure and Verify NTP. Lees meer
Network Time Protocol (NTP) synchronizes the time of day among a set of distributed time servers and clients. While there are a number of applications that require synchronized time, this lab will focus on correlating events that are listed in the system log and other time-specific events from multiple network devices. NTP uses the User Datagram Protocol (UDP) as its transport protocol. All NTP communications use Coordinated Universal Time (UTC).
An NTP server usually receives its time from an authoritative time source, such as an atomic clock attached to a time server. The NTP server then distributes this time across the network. NTP is extremely efficient. No more than one packet per minute is necessary to synchronize two devices to within a millisecond of each other.
We will be configuring NTP on R1 and R2 to allow time synchronization.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Management
Lab 10.3.4 - Configure and Verify NTP
Podcast Number: 83
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Use LLDP to Map a Network - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 82
30 november 2022 · 1 uur 12 min
In this episode we are going to look at Use LLDP to Map a Network. Lees meer
A senior network administrator requires us to map the Remote Branch Office network and discover information about all of the devices in the network. We must record all of the network device names, IP addresses and subnet masks, and physical interfaces interconnecting the network devices.
To map the network, we will use SSH for remote access and the Link Layer Discovery Protocol (LLDP) to discover information about neighboring network devices. Because LLDP is a Layer 2 protocol, it can be used to discover information about devices that do not have Layer 3 connectivity. We will record the information that we gather to complete the Addressing Table and provide a topology diagram of the Remote Branch Office network.
We will be Mapping a network using LLDP and SSH remote access.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Management
Lab 10.2.6 - Use LLDP to Map a Network
Podcast Number: 82
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Use CDP to Map a Network - Network Management - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 81
28 november 2022 · 1 uur 2 min
In this episode we are going to look at Use CDP to Map a Network. Lees meer
A senior network administrator requires us to map the Remote Branch Office network and discover the name of a recently installed switch that still needs an IP address to be configured. Our task is to create a map of the branch office network. We must record all of the network device names, IP addresses and subnet masks, and physical interfaces interconnecting the network devices, as well as the name of the switch that does not have an IP address.
To map the network, we will use SSH for remote access and the Cisco Discovery Protocol (CDP) to discover information about neighboring network devices. Because CDP is a Layer 2 protocol, it can be used to discover information about devices that do not have IP addresses. We will record the gathered information to complete the Addressing Table and provide a topology diagram of the Remote Branch Office network.
We will be discussing Map a network using CDP and SSH remote access.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Network Management
Lab 10.1.5 - Use CDP to Map a Network
Podcast Number: 81
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
WAN Concepts - WAN Concepts - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 80
25 november 2022 · 36 min
In this episode we are going to look at WAN Concepts. Lees meer
We will be investigating various types of WANs by exploring a topology that uses diverse connectivity technologies.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
WAN Concepts
Lab 7.6.1 - WAN Concepts
Podcast Number: 80
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure NAT for IPv4 - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 79
23 november 2022 · 20 min
In this episode we are going to look at Configure NAT for IPv4. Lees meer
We will be Configuring Dynamic NAT with PAT and Configuring Static NAT.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
NAT for IPv4
Lab 6.8.1 - Configure NAT for IPv4
Podcast Number: 79
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure PAT - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 78
21 november 2022 · 25 min
In this episode we are going to look at Configure PAT. Lees meer
We will be Configuring Dynamic NAT with Overload, Verifying Dynamic NAT with Overload Implementation, Configuring PAT using an Interface, and finally Verifying PAT Interface Implementation.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
NAT for IPv4
Lab 6.6.7 - Configure PAT
Podcast Number: 78
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Dynamic NAT - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 77
18 november 2022 · 18 min
In this episode we are going to look at Configure Dynamic NAT. Lees meer
We will be Configuring Dynamic NAT and Verifying NAT Implementation.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
NAT for IPv4
Lab 6.5.6 - Configure Dynamic NAT
Podcast Number: 77
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Static NAT - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 76
16 november 2022 · 17 min
In this episode we are going to look at Configure Static NAT. Lees meer
In IPv4 configured networks, clients and servers use private addressing. Before packets with private addressing can cross the internet, they need to be translated to public addressing. Servers that are accessed from outside the organization are usually assigned both a public and a private static IP address. In this activity, we will configure static NAT so that outside devices can access an inside server at its public address.
We will be Testing Access without NAT, Configuring Static NAT, and Testing Access with NAT.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
NAT for IPv4
Lab 6.4.5 - Configure Static NAT
Podcast Number: 76
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Investigate NAT Operations - NAT for IPv4 - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 75
14 november 2022 · 46 min
In this episode we are going to look at Investigate NAT Operations. Lees meer
As a frame travels across a network, the MAC addresses may change. IP addresses can also change when a packet is forwarded by a device configured with NAT. In this activity, we will investigate what happens to IP addresses during the NAT process.
We will be Investigating NAT Operation Across the Intranet, Investigating NAT Operation Across the Internet, and Conduct Further Investigations.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
NAT for IPv4
Lab 6.2.7 - Investigate NAT Operations
Podcast Number: 75
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
IPv4 ACL Implementation Challenge - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 74
11 november 2022 · 1 uur 6 min
In this episode we are going to look at IPv4 ACL Implementation Challenge. Lees meer
In this activity we will configure extended, standard named, and extended named ACLs to meet specified communication requirements.
We will be discussing Configuring a router with standard named ACLs, Configuring a router with extended named ACLs, Configuring a router with extended ACLs to meet specific communication requirements, Configuring an ACL to control access to network device terminal lines, Configuring the appropriate router interfaces with ACLs in the appropriate direction, and finally Verifying the operation of the configured ACLs., , , .
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
ACLs for IPv4 Configuration
Lab 5.5.1 - IPv4 ACL Implementation Challenge
Podcast Number: 74
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Extended IPv4 ACLs - Scenario 2 - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 73
9 november 2022 · 1 uur 6 min
In this episode we are going to look at Configure Extended IPv4 ACLs - Scenario 2. Lees meer
In this scenario, specific devices on the LAN are allowed to various services on servers located on the internet.
We will be discussing Configuring a Named Extended ACL and finally Appling and Verifying the Extended ACL.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
ACLs for IPv4 Configuration
Lab 5.4.13 - Configure Extended IPv4 ACLs - Scenario 2
Podcast Number: 73
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Extended ACLs - Scenario 1 - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 72
7 november 2022 · 38 min
In this episode we are going to look at Configure Extended ACLs - Scenario 1. Lees meer
Two employees need access to services provided by the server. PC1 only needs FTP access while PC2 only needs web access. Both computers need to be able to ping the server, but not each other.
We will be Configuring, Applying and Verifying an Extended Numbered ACL, and finally Configuring, Applying and Verifying an Extended Named ACL.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
ACLs for IPv4 Configuration
Lab 5.4.12 - Configure Extended ACLs - Scenario 1
Podcast Number: 72
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure and Modify Standard IPv4 ACLs - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 71
4 november 2022 · 1 uur 3 min
In this episode we are going to look at Configure and Modify Standard IPv4 ACLs. Lees meer
Network security and traffic flow control are important issues when designing and managing IP networks. The ability to configure proper rules to filter packets, based on established security policies, is a valuable skill.
In this lab, we will set up filtering rules for two business locations that are represented by R1 and R3. Management has established some access policies between the LANs located at R1 and R3, which we must implement. The Edge router sitting between R1 and R3 has been provided by the ISP will not have any ACLs placed on it. We would not be allowed any administrative access to the Edge router because we can only control and manage your own equipment.
We will be discussing Verifying Connectivity, Configuring and Verifying Standard Numbered and Named ACLs and finally Modify a Standard ACL.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
ACLs for IPv4 Configuration
Lab 5.2.7 - Configure and Modify Standard IPv4 ACLs
Podcast Number: 71
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Named Standard IPv4 ACLs - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 70
2 november 2022 · 19 min
In this episode we are going to look at Configure Named Standard IPv4 ACLs. Lees meer
The senior network administrator has asked us to create a standard named ACL to prevent access to a file server. The file server contains the data base for the web applications. Only the Web Manager workstation PC1 and the Web Server need to access the File Server. All other traffic to the File Server should be denied.
We will be discussing Configure and Apply a Named Standard ACL and Verify the ACL Implementation.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
ACLs for IPv4 Configuration
Lab 5.1.9 - Configure Named Standard IPv4 ACLs
Podcast Number: 70
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Numbered Standard IPv4 ACLs - ACLs for IPv4 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 69
31 oktober 2022 · 34 min
In this episode we are going to look at Configure Numbered Standard IPv4 ACLs. Lees meer
Standard access control lists (ACLs) are router configuration scripts that control whether a router permits or denies packets based on the source address. This activity focuses on defining filtering criteria, configuring standard ACLs, applying ACLs to router interfaces, and verifying and testing the ACL implementation. The routers are already configured, including IP addresses and Enhanced Interior Gateway Routing Protocol (EIGRP) routing.
We will be discussing Planning an ACL Implementation and finally Configure, Apply, and Verify a Standard ACL.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
ACLs for IPv4 Configuration
Lab 5.1.8 - Configure Numbered Standard IPv4 ACLs
Podcast Number: 69
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Access Control List Demonstration - ACL Concepts - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 68
28 oktober 2022 · 17 min
In this episode we are going to look at Access Control List Demonstration. Lees meer
In this activity, we will observe how an access control list (ACL) can be used to prevent a ping from reaching hosts on remote networks. After removing the ACL from the configuration, the pings will be successful.
We will be discussing Verifying Local Connectivity and Test Access Control List and finally Remove Access Control List and Repeat Test.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
ACL Concepts
Lab 4.1.4 - Access Control List Demonstration
Podcast Number: 68
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Single-Area OSPFv2 Configuration - Single-Area OSPFv2 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 67
26 oktober 2022 · 1 uur
In this episode we are going to look at Single-Area OSPFv2 Configuration. Lees meer
We are helping a network engineer test an OSPF set up by building the network in the lab where you work. We have interconnected the devices and configured the interfaces and have connectivity within the local LANs. Our job is to complete the OSPF configuration according to the requirements left by the engineer.
Use the information provided and the list of requirements to configure the test network. When the task has been successfully completed, all hosts should be able to ping the internet server.
We will be discussing Implement single-area OSPFv2 in both point-to-point and broadcast multiaccess networks.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Single-Area OSPFv2 Configuration
Lab 2.7.1 - Single-Area OSPFv2 Configuration
Podcast Number: 67
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Verify Single-Area OSPFv2 - Single-Area OSPFv2 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 66
24 oktober 2022 · 40 min
In this episode we are going to look at Verify Single-Area OSPFv2. Lees meer
We are the network administrator for a branch office of a larger organization. Our branch is adding a new wireless network into an existing branch office LAN. The existing network is configured to exchange routes using OSPFv2 in a single-area configuration. Our task is to verify the operation of the existing OSPFv2 network, before adding in the new LAN. When we are sure that the current OSPFv2 LAN is operating correctly, we will connect the new LAN and verify that OSPF routes are being propagated for the new LAN. As branch office network administrator, we have full access to the IOS on routers R3 and R4. We only have read access to the enterprise LAN routers R1 and R2, using the username BranchAdmin, and the password Branch1234.
We will be discussing the CLI commands to verify the operation of an existing OSPFv2 network. In Part 2, we will add a new LAN to the configuration and verify connectivity, identify and verify the status of OSPF neighbors, determine how the routes are being learned in the network, explain how the neighbor state is determined, examine the settings for the OSPF process ID, and finally add a new LAN into an existing OSPF network and verify connectivity.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Single-Area OSPFv2 Configuration
Lab 2.6.6 - Verify Single-Area OSPFv2
Podcast Number: 66
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechi…
-
Propagate a Default Route in OSPFv2 - Single-Area OSPFv2 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 65
21 oktober 2022 · 18 min
In this episode we are going to look at Propagate a Default Route in OSPFv2. Lees meer
In this activity, we will configure an IPv4 default route to the Internet and propagate that default route to other OSPF routers. We will then verify the default route is in downstream routing tables and that hosts can now access a web server on the Internet.
We will be discussing Propagating a Default Route and Verifying Connectivity.
Thank you so much for listening to this episode of my series on Enterprise Networking, Security, and Automation for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Single-Area OSPFv2 Configuration
Lab 2.5.3 - Propagate a Default Route in OSPFv2
Podcast Number: 65
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Modify Single-Area OSPFv2 - Single-Area OSPFv2 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 64
19 oktober 2022 · 21 min
In this episode we are going to look at configuring Modify Single-Area OSPFv2. Lees meer
In this activity, OSPF is already configured and all end devices currently have full connectivity. We will modify the default OSPF routing configurations by changing the hello and dead timers and adjusting the bandwidth of a link. Then we will verify that full connectivity is restored for all end devices.
We will be Modifying OSPF Default Settings and Verifying Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Single-Area OSPFv2 Configuration
Lab 2.4.11 - Modify Single-Area OSPFv2
Podcast Number: 64
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Determine the DR and BDR - Single-Area OSPFv2 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 63
17 oktober 2022 · 38 min
In this episode we are going to look at configuring Determine the DR and BDR. Lees meer
In this activity, we will examine DR and BDR roles and watch the roles change when there is a change in the network. We will then modify the priority to control the roles and force a new election. Finally, we will verify routers are filling the desired roles.
We will be Examine DR and BDR Changing Roles and then Modify OSPF Priority and Force Elections.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Single-Area OSPFv2 Configuration
Lab 2.3.11 - Determine the DR and BDR
Podcast Number: 63
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Point-to-Point Single-Area OSPFv2 Configuration - Single-Area OSPFv2 Configuration - Configuration Examples for Enterprise Networking, Security, and Automation - CCNA - KevTechify | podcast 62
14 oktober 2022 · 34 min
In this episode we are going to look at configuring Point-to-Point Single-Area OSPFv2 Configuration. Lees meer
In this activity, we will activate OSPF routing using network statements and wildcard masks, configuring OSPF routing on interfaces, and by using network statements quad-zero masks. In addition, we will configure explicit router IDs and passive interfaces.
We will be Configuring Router IDs, Configuring Networks for OSPF Routing, Configuring Passive Interfaces, and Verifying OSPF configuration.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Enterprise Networking, Security, and Automation v3 (ENSA)
Single-Area OSPFv2 Configuration
Lab 2.2.13 - Point-to-Point Single-Area OSPFv2 Configuration
Podcast Number: 62
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshoot Static and Default Routes - Troubleshoot Static and Default Routes - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 61
12 oktober 2022 · 50 min
In this episode we are going to look at configuring Troubleshoot Static and Default Routes. Lees meer
A newly hired network technician is attempting to preconfigure a simple topology that will be delivered to a customer. The technician has not been able to establish connectivity between the three LANs. We have been asked to troubleshoot the topology and verify connectivity between the hosts on the three LANs over IPv4 and IPv6.
We will be troubleshooting static and default routes and repair any errors that you find, Troubleshooting IPv4 static routes, Troubleshooting IPv4 default routes, Troubleshooting IPv6 static routes, Configuring IPv4 static routes, Configuring IPv4 default routes, and finally Configuring IPv6 static routes.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Troubleshoot Static and Default Routes
Lab 16.3.1 - Troubleshoot Static and Default Routes
Podcast Number: 61
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure IPv4 and IPv6 Static and Default Routes - IP Static Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 60
10 oktober 2022 · 56 min
In this episode we are going to look at configuring Configure IPv4 and IPv6 Static and Default Routes. Lees meer
In this activity, we will configure IPv4 and IPv6 default static and floating static routes.
The static routing approach that is used in this activity is used to assess our ability to configure different types of static routes only. This approach may not reflect networking best practices.
We will be configuring static, default, and floating static routes for both the IPv4 and IPv6 protocols, Configure IPv4 Static and Floating Static Default Routes, Configure IPv6 static and floating static default routes, Configure IPv4 static and floating static routes to internal LANs, Configure IPv6 static and floating static routes to the internal LANS, Configure IPv4 host routes, and Configure IPv6 host routes.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
IP Static Routing
Lab 15.6.1 - Configure IPv4 and IPv6 Static and Default Routes
Podcast Number: 60
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Basic Router Configuration Review - Routing Concepts - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 59
7 oktober 2022 · 1 uur 3 min
In this episode we are going to look at configuring Basic Router Configuration Review. Lees meer
This activity requires us to configure the router using the settings from the Addressing Table and the specifications listed. The other router and the devices connected to it have been configured. This is a comprehensive review of previously covered IOS router commands. In Part 1, we will complete basic configurations and interface settings on the router. In Part 2 (the next episode), we will use SSH to connect to the router remotely and utilize the IOS commands to retrieve information from the device to answer questions about the router. For review purposes, this activity will provide the commands necessary for specific router configurations.
We will be in Part 1: Configuring Devices and Verifying Connectivity, Assigning static IPv4 and IPv6 addresses to the PC interfaces, Configuring basic router settings, Configuring the router for SSH, and Verifying network connectivity. In Part 2: Display Router Information, Retrieve hardware and software information from the router, Interpret the startup configuration, and Interpret the routing table..
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Routing Concepts
Lab 14.3.5 - Basic Router Configuration Review
Podcast Number: 59
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://ki…
-
WLAN Configuration - WLAN Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 58
5 oktober 2022 · 50 min
In this episode we are going to look at configuring WLAN Configuration. Lees meer
We will apply our WLAN skills and knowledge by configuring a home wireless router and an enterprise WLC. We will implement both WPA2-PSK and WPA2-Enterprise security. Finally, we will connect hosts to each WLAN and verify connectivity.
We will be configuring both a wireless home router and a WLC-based network. We will implement both WPA2-PSK and WPA2-Enterprise security, Configure a home router to provide Wi-Fi connectivity to a variety of devices, Configure WPA2-PSK security on a home router, Configure interfaces on a WLC, Configure WLANs on a WLC, Configure WPA2-PSK security on a WLAN and connect hosts to WLAN, Configure WPA2-Enteprise on a WLAN and connect hosts to the WLAN, and finally Verify connectivity WLAN connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
WLAN Configuration
Lab 13.5.1 - WLAN Configuration
Podcast Number: 58
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshoot WLAN Issues - WLAN Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 57
3 oktober 2022 · 38 min
In this episode we are going to look at configuring Troubleshoot WLAN Issues. Lees meer
Now that we have learned how to configure wireless in home and enterprise networks, we need to learn how to troubleshoot in both wireless environments. Our goal is to enable connectivity between hosts on the networks to the web server by both IP address and URL. Connectivity between the home and enterprise networks is not required.
We will be troubleshooting various issues in home wireless and enterprise wireless networks, Troubleshoot wireless LAN connectivity issues in a home network, and Troubleshoot wireless LAN connectivity issues in an enterprise network.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
WLAN Configuration
Lab 13.4.5 - Troubleshoot WLAN Issues
Podcast Number: 57
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure a WPA2 Enterprise WLAN on the WLC - WLAN Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 56
30 september 2022 · 51 min
In this episode we are going to look at configuring Configure a WPA2 Enterprise WLAN on the WLC. Lees meer
We have already configured and tested the WLC with an existing WLAN. We configured WPA2-PSK for that WLAN because it was to be used in a smaller business. We have been asked to configure and test a WLC topology that will be used in a larger enterprise. We know that WPA2-PSK does not scale well and is not appropriate to use in an enterprise network. This new topology will use a RADIUS server and WPA2-Enterprise to authenticate WLAN users. This allows administration of the user accounts from a central location and provides enhanced security and transparency because each account has its own username and password. In addition, user activity is logged on the server.
In this lab, we will create a new VLAN interface, use that interface to create a new WLAN, and secure that WLAN with WPA2-Enterprise. We will also configure the WLC to use the enterprise RADIUS server to authenticate users. In addition, we will configure the WLC to use a SNMP server.
We will be configuring a new WLAN on a wireless LAN controller (WLC), including the VLAN interface that it will use. We will configure the WLAN to use a RADIUS server and WPA2-Enterprise to authenticate users. We will also configure the WLC to use an SNMP server, Configure a new VLAN interface on a WLC, Configure a new WLAN on a WLC, Configure a new scope on the WLC internal DHCP server, Configure the WLC with SNMP settings, Configure the WLC to user a RADIUS server to authenticate WLAN users, Secure a WLAN with WPA2-Enterprise, and Connect hosts to the new WLC.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------…
-
Configure a Basic WLAN on the WLC - WLAN Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 55
28 september 2022 · 28 min
In this episode we are going to look at configuring Configure a Basic WLAN on the WLC. Lees meer
An organization is centralizing control of their wireless LAN by replacing their standalone access points with lightweight access points (LAP) and a wireless LAN controller (WLC). We will be leading this project and we want to become familiar with the WLC and any potential challenges that may occur during the project. We will configure a WLC by adding a new wireless network and securing it with WPA-2 PSK security. To test the configuration, we will connect a laptop to the WLAN and ping devices on the network.
We will be exploring some of the features of a wireless LAN controller. We will create a new WLAN on the controller and implement security on that LAN. Then we will configure a wireless host to connect to the new WLAN through an AP that is under the control of the WLC. Finally, we will verify connectivity, Connect to a wireless LAN controller GUI, Explain some of the information that is available on the WLC Monitor screen, Configure a WLAN on a wireless LAN controller, Implement security on a WLAN, and finally Configure a wireless host to connect to a wireless LAN.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
WLAN Configuration
Lab 13.2.7 - Configure a Basic WLAN on the WLC
Podcast Number: 55
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
… -
Configure a Wireless Network - WLAN Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 54
26 september 2022 · 41 min
In this episode we are going to look at configuring Configure a Wireless Network. Lees meer
In this activity, we will configure a wireless router and an access point to accept wireless clients and route IP packets. Furthermore, we will also update some of the default settings.
We will be Connecting to a wireless router, Configuring the wireless router, Connecting a wired device to the wireless router, Connecting a wireless device to the wireless router, Adding an AP to the network to extend wireless coverage, and finally Updating default router settings.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
WLAN Configuration
Lab 13.1.10 - Configure a Wireless Network
Podcast Number: 54
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Switch Security Configuration - Switch Security Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 53
23 september 2022 · 48 min
In this episode we are going to look at configuring Implement Port Security. Lees meer
In this activity, we will configure and verify port security on a switch. Port security allows us to restrict a port’s ingress traffic by limiting the MAC addresses that are allowed to send traffic into the port.
We will be Configuring Port Security and Verifying Port Security.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Switch Security Configuration
Lab 11.6.1 - Switch Security Configuration
Podcast Number: 53
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Implement Port Security - Switch Security Configuration - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 52
21 september 2022 · 26 min
In this episode we are going to look at configuring Implement Port Security. Lees meer
In this activity, we will configure and verify port security on a switch. Port security allows us to restrict a port’s ingress traffic by limiting the MAC addresses that are allowed to send traffic into the port.
We will be Configuring Port Security and Verifying Port Security.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Switch Security Configuration
Lab 11.1.10 - Implement Port Security
Podcast Number: 52
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
HSRP Configuration Guide - FHRP Concepts - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 51
19 september 2022 · 55 min
In this episode we are going to look at configuring HSRP Configuration Guide. Lees meer
Spanning Tree Protocol provides loop-free redundancy between switches within a LAN. However, it does not provide redundant default gateways for end-user devices within the network if a gateway router fails. First Hop Redundancy Protocols (FHRPs) provide redundant default gateways for end devices with no additional end-user configuration necessary. By using a FHRP, two or more routers can share the same virtual IP address and MAC address and can act as a single virtual router. Hosts on the network are configured with a shared IP address as their default gateway. In this activity, we will configure Cisco’s Hot Standby Router Protocol (HSRP), which is an FHRP. We will configure HSRP on routers, which serve as the default gateways for the hosts on LAN 1 and LAN 2. When we configure HSRP, we will create a virtual gateway that uses the same default gateway address for hosts in both LANs. If one gateway router becomes unavailable, the second router will take over using the same default gateway address that was used by the first router. Because the hosts on the LANs are configured with the IP address of the virtual gateway as the default gateway, the hosts will regain connectivity to remote networks after HSRP activates the remaining router.
We will be configuring Hot Standby Router Protocol (HSRP) to provide redundant default gateway devices to hosts on LANs. After configuring HSRP, we will test the configuration to verify that hosts are able to use the redundant default gateway if the current gateway device becomes unavailable. Configure an HSRP active router, Configure an HSRP standby router, and Verify HSRP operation.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my web…
-
Implement DHCPv4 - DHCPv4 - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 50
16 september 2022 · 31 min
In this episode we are going to look at configuring Implement DHCPv4. Lees meer
As the network technician for our company, we are tasked with configuring a Cisco router as a DHCP server to provide dynamic allocation of addresses to clients on the network. We are also required to configure the edge router as a DHCP client so that it receives an IP address from the ISP network. Since the server is centralized, we will need to configure the two LAN routers to relay DHCP traffic between the LANs and the router that is serving as the DHCP server.
We will be Configuring a Router as a DHCP Server, Configuring DHCP Relay, and Configuring a Router as a DHCP Client.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
DHCPv4
Lab 7.4.1 - Implement DHCPv4
Podcast Number: 50
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure DHCPv4 - DHCPv4 - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 49
14 september 2022 · 35 min
In this episode we are going to look at configuring Configure DHCPv4. Lees meer
A dedicated DHCP server is scalable and relatively easy to manage but it can be costly to have one at every location in a network. However, a Cisco router can be configured to provide DHCP services without the need for a dedicated server. As the network technician for our company, we have been assigned the task of configuring a Cisco router as a DHCP server. We are also required to configure the edge router as a DHCP client so that it receives an IP address from the ISP network.
We will be Configuring a Router as a DHCP Server, Configuring DHCP Relay, Configuring a Router as a DHCP Client, and finally Verifying DHCP and Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
DHCPv4
Lab 7.2.10 - Configure DHCPv4
Podcast Number: 49
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Implement EtherChannel - EtherChannel - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 48
12 september 2022 · 34 min
In this episode we are going to look at Implementing EtherChannel. Lees meer
We have been assigned the task of designing an EtherChannel implementation for a company that wants to improve the performance of their switch trunk links. We will try several different ways of implementing the EtherChannel links in order to evaluate which is the best for the company. We will build the topology, configure trunk ports, and implement LACP and PAgP EtherChannels.
We will be Building the network and Configuring EtherChannel.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
EtherChannel
Lab 6.4.1 - Implement EtherChannel
Podcast Number: 48
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshoot EtherChannel - EtherChannel - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 47
9 september 2022 · 33 min
In this episode we are going to look at configuring Troubleshoot EtherChannel. Lees meer
A junior technician recently configured four switches. Users are complaining that the network is running slowly, and they would like us to investigate.
We will be Examining the Physical Layer and Correct Switch Port Mode Issues, Identifying and Correcting Port Channel Assignment Issues, and finally Identify and Correct Port Channel Protocol Issues.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
EtherChannel
Lab 6.3.4 - Troubleshoot EtherChannel
Podcast Number: 47
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure EtherChannel - EtherChannel - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 46
7 september 2022 · 51 min
In this episode we are going to look at configuring Configure EtherChannel. Lees meer
Three switches have just been installed. There are redundant uplinks between the switches. As configured, only one of these links can be used; otherwise, a bridging loop might occur. However, using only one link utilizes only half of the available bandwidth. EtherChannel allows up to eight redundant links to be bundled together into one logical link. In this lab, we will configure Port Aggregation Protocol (PAgP), a Cisco EtherChannel protocol, and Link Aggregation Control Protocol (LACP), an IEEE 802.3ad open standard version of EtherChannel.
We will be Configuring Basic Switch Settings, Configuring an EtherChannel with Cisco PAgP, Configuring an 802.3ad LACP EtherChannel, and Configuring a Redundant EtherChannel Link.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
EtherChannel
Lab 6.2.4 - Configure EtherChannel
Podcast Number: 46
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Investigate STP Loop Prevention - STP Concepts - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 45
5 september 2022 · 19 min
In this episode we are going to look at configuring Investigate STP Loop Prevention. Lees meer
In this activity we will use Packet Tracer to observe the operation of Spanning Tree Protocol in a simple switched network that has redundant paths.
We will be observing spanning-tree port states and watch the spanning-tree convergence process, Describe the operation of Spanning Tree Protocol, and finally Explain how Spanning Tree Protocol prevents switching loops while allowing redundancy in switched networks.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
STP Concepts
Lab 5.1.9 - Investigate STP Loop Prevention
Podcast Number: 45
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Inter-VLAN Routing Challenge - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 44
2 september 2022 · 30 min
In this episode we are going to look at configuring Inter-VLAN Routing Challenge. Lees meer
In this activity, we will demonstrate and reinforce your ability to implement inter-VLAN routing, including configuring IP addresses, VLANs, trunking, and subinterfaces.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Inter-VLAN Routing
Lab 4.5.1 - Inter-VLAN Routing Challenge
Podcast Number: 44
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Troubleshoot Inter-VLAN Routing - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 43
31 augustus 2022 · 25 min
In this episode we are going to look at configuring Troubleshoot Inter-VLAN Routing. Lees meer
In this activity, we will troubleshoot connectivity problems caused by improper configurations related to VLANs and inter-VLAN routing.
We will be Locating Network Problems, Implementing the Solution, and Verifying Network Connectivity.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Inter-VLAN Routing
Lab 4.4.8 - Troubleshoot Inter-VLAN Routing
Podcast Number: 43
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Layer 3 Switching and Inter-VLAN Routing - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 42
29 augustus 2022 · 40 min
In this episode we are going to look at configuring Configure Layer 3 Switching and Inter-VLAN Routing. Lees meer
A multilayer switch like the Cisco Catalyst 3650 is capable of both Layer 2 switching and Layer 3 routing. One of the advantages of using a multilayer switch is this dual functionality. A benefit for a small to medium-sized company would be the ability to purchase a single multilayer switch instead of separate switching and routing network devices. Capabilities of a multilayer switch include the ability to route from one VLAN to another using multiple switched virtual interfaces (SVIs), as well as the ability to convert a Layer 2 switchport to a Layer 3 interface.
We will be Configuring Layer 3 Switching, Configuring Inter-VLAN Routing, and Configuring IPv6 Inter-VLAN Routing.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Inter-VLAN Routing
Lab 4.3.8 - Configure Layer 3 Switching and Inter-VLAN Routing
Podcast Number: 42
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment
-
Configure Router-on-a-Stick Inter-VLAN Routing - Inter-VLAN Routing - Configuration Examples for Switching, Routing, and Wireless Essentials - CCNA - KevTechify | podcast 41
26 augustus 2022 · 29 min
In this episode we are going to look at configuring Configure Router-on-a-Stick Inter-VLAN Routing. Lees meer
In this activity we will configure VLANs and inter-VLAN routing. We will then enable trunk interfaces and verify connectivity between VLANs.
We will be discussing Adding VLANs to a Switch, Configuring Subinterfaces, and Testing Connectivity with Inter-VLAN Routing.
Thank you so much for watching this episode of my series on Configuration Examples for the Cisco Certified Network Associate (CCNA).
Once again, I’m Kevin and this is KevTechify. Let’s get this adventure started.
All my details and contact information can be found on my website, https://KevTechify.com
YouTube Channel: https://YouTube.com/KevTechify
-------------------------------------------------------
Cisco Certified Network Associate (CCNA)
Configuration Examples for Switching, Routing, and Wireless Essentials v2 (SRWE)
Inter-VLAN Routing
Lab 4.2.7 - Configure Router-on-a-Stick Inter-VLAN Routing
Podcast Number: 41
Season: 1
-------------------------------------------------------
Equipment I like.
Home Lab ►► https://kit.co/KevTechify/home-lab
Networking Tools ►► https://kit.co/KevTechify/networking-tools
Studio Equipment ►► https://kit.co/KevTechify/studio-equipment